LED投光灯使用说明
来源： 作者： 时间：2018-03-22 浏览次数：
1产品使用工作电压：AC100V~240V 50/60Hz。勿超出工作电压。 2.储存环境温度-60℃~+50℃，工作温度：-30℃~+50℃，最佳工作环境温度-0℃~+30℃ 3.由于灯具有玻璃配件，在搬运，储存的时候请注意轻拿轻放，勿重压。 安装说明
1.通过产品安装支架上的安装孔位可直接用螺丝固定与安装杆或者安装面上。
2.固定好产品后，可将调节角度螺丝调松，然后转换支架的角度，也就是相当于调节灯具的安装角度。
3.安装灯具时，接线与接线处封闭好，防漏电，外接电源时，必须采取相应的防水措施。 4.该灯具使用时不能违反任何防火法规，不能覆盖灯具表面。 5.安装请找专业的安装人员。
6.要定期对灯具表面进行清洁，清洁前请确定已经断电，清洁时不能用水或者腐蚀性强的溶剂进行清洁，最好用干抹布。
LED Flood light installation instructions 
Instructions for use:
1. Using working voltage:AC100V~240V 50/60Hz,do not exceed the operating voltage
range.
2.Storage environment temperature:-60 ℃ ~+50 ℃, the working temperature: -30 ℃ ~+50 ℃, the optimum temperature of working environment: -0 ℃~+30 ℃. 3. As a result of the light with glass lamp fittings, when carry, please pay attention to handling gently, don't stress
The installation diagram
1. Through the mounting hole on the mounting bracket to be directly fixed with
screws and the installation rod or mounting surface. 2. After products fixed, to loose adjustable screw, then transform the bracket angle, which is to adjust the installation angle of the lamp.
3. Installation of lamps, wiring and wiring goods sealing good to prevent leakage. Using external power must be take measures for waterproof.
4. The lamp be used can’t violate for any of fire regulation, can’t cover the surface of the product.
5. Please find professional installer to installation.
6. Please regular cleaning of the lamp body surface, and please be sure the power is cut off before cleaning. Do not use water or strong corrosion of solvent to cleaning, preferably with a dry cloth.
责任编辑：中山市灵创照明销售部—周兰芳
http://www.led-li.cn/ 《中山市灵创照明有限公司》
上一篇：LED泛光灯和投光灯的区别
